take the cotter key out of the ends and unscrew the plugs, it all comes apart. just lay out parts as you take apart and take a picture or draw a map. it not to hard and i think the parts book has a blow up. it should not be hard to find a replacement end. dell ps looks like howard posted the picture for you

if the ball end are not warren it is a take apart and clean. the right outer link looks bent,it doer have a slight bend but yours looks excessive. dell

i think u got it dell

richk; i have a 42 110 conv. and have had every bolt in the car apart. there are not that many large bolt that have the washers and rubber, i wonder if someone replaced a body to frame bolt with a large bolt. dell

i think howard is correct, but i believe it should be a carriage bolt. also rubber shims between radiator cradle and frame. dell

john ulrich sells them, he has adds in packard literature

still trying to find the correct head for my 28 526. the head on the right is like the one on the car,does anyone know what year the left head is?

Attach file:

---

  (11.16 KB)


  (11.16 KB)

your unit should be electric, see if you have a electric motor shop in coosbay. good luck mark ps make sure to check switch and wires first

i have been having a problem with a compression leak in to the radiator which blows water out. i have changed the gasket and had some areas spray welded as some of the water passage holes are very rusty. i found another head, but the combustion chamber is different then the head on the car-it covers or is the size of the gasket (will try to post picture) i don't know which head is correct. if i can get the picture the right size i hope i can get a little help. thanks dell ps head on the right is like the one on the car there are no casting numbers that are readable- the head on the right has a 180 cc chamber, the left is 169. the 28 gasket matches all the bolt and water holes in both heads. the heads are the same thickness- does anyone have any idea what year the left head is? i thought for sure that some one would have sean one before. thanks

Attach file:

---

  (11.16 KB)

howard; i bought 100ft of L shaped rubber from karr as that was the shortest they would sell, i used it on my 48 custom and 48 woodie and sold some to one of our regional members. it is 3/4 X 3/4 which is smaller then the original which was 7/8 on each leg. i looked all over and it was the closest i could find. dell