Re: Stewart's 1955 Packard 400
|
||||
---|---|---|---|---|
Home away from home
|
Posted on: 2023/11/19 20:58
|
|||
Stewart Ballard
|
||||
|
Re: Stewart's 1955 Packard 400
|
||||
---|---|---|---|---|
Home away from home
|
I found a company online that makes these wire terminals but they only sold in bulk.
I doubt I could ever sell the remaining 55,992 of them. I'll just see if I can salvage these original connections off the old wires. Better yet, I will probably just splice my new wires into the originals. Attach file: wireconnector.jpg (113.61 KB)
Posted on: 2023/11/19 19:37
|
|||
Stewart Ballard
|
||||
|
Re: Stewart's 1955 Packard 400
|
||||
---|---|---|---|---|
Home away from home
|
The new PW master switch came in yesterday. One of the pins is slightly bent but so it is used. I can't complain though. Its movements are like new. I am lucky it was listed for a Caddy because it was about 55% less than the switches listed for Packard.
I gave it a quick test and it worked the regulator as it should. Now I need to locate some compatible wire connections so I can connect it the right way. I could splice into the old wires but would prefer to replace the wires if I can find the right connectors in the second image.
Posted on: 2023/11/19 14:44
|
|||
Stewart Ballard
|
||||
|
Re: Stewart's 1955 Packard 400
|
||||
---|---|---|---|---|
Home away from home
|
That extra PW switch that came with the car does not work. It is probably one of those hydraulic-style switches. The pin pattern matches up but it is not built the same way at all.
I did locate a 53-57 Cadillac switch (no bezel) that matches the Packard switch. It's made by Delta Electic just like the Packard. I'll know more when it arrives. I am currently researching ideas for my radio. It has been ages since I have messed around with a car radio and everything has changed. What have some of you done? I thinking of something Bluetooth w/FM radio but I am not committed to that.
Posted on: 2023/11/14 19:29
|
|||
Stewart Ballard
|
||||
|
Re: Stewart's 1955 Packard 400
|
||||
---|---|---|---|---|
Home away from home
|
Well, I did exactly what I was afraid of. I broke the 4-gang power windows switch. You can see it in photo1 below. Also, I inadvertently removed my finger from a spring under one of the switches and sent it flying across my shop.
In photo2 you see the original bezel that came out of this car on the right and the switch on the left was in the trunk of the car when I brought it home. When I place this mystery switch assembly into the original bezel (photo3), it fits like a glove. Also, this switch assembly fits the Packard connector on the wire harness exactly (photo4). So, I get a second chance and will try not to break this other assembly. The pins on a typical GM switch have a different pattern. I have no idea what this one is but I guess it could also be a Packard switch as well. Attach file: photo1.jpg (145.47 KB) photo2.jpg (205.13 KB) photo3.jpg (219.81 KB) photo4.jpg (206.81 KB)
Posted on: 2023/11/11 16:12
|
|||
Stewart Ballard
|
||||
|
Re: Stewart's 1955 Packard 400
|
||||
---|---|---|---|---|
Home away from home
|
I stopped by the interior shop this morning. Starting to see some progress.
I need to disassemble all the power window switches and clean them up to make to functional again. Any tips would be appreciated. I would prefer not to screw them up and have to replace something. Attach file: 20231110_100514_resized.jpg (257.82 KB) 20231110_100233_resized.jpg (250.33 KB) 20231110_095632_resized.jpg (288.98 KB) 20231110_095132_resized.jpg (306.08 KB)
Posted on: 2023/11/10 15:49
|
|||
Stewart Ballard
|
||||
|
Re: Stewart's 1955 Packard 400
|
||||
---|---|---|---|---|
Home away from home
|
I got a bunch of lights working. All the door jamb switches are doing their job. The headlights work but are not installed yet.
Now I can get back to finishing up the window regulators and glass installed. Attach file: 20231109_142814_resized.jpg (260.48 KB) 20231109_142743_resized.jpg (163.14 KB) 20231109_142734_resized.jpg (255.91 KB) 20231109_142751_resized.jpg (290.90 KB)
Posted on: 2023/11/9 21:39
|
|||
Stewart Ballard
|
||||
|
Re: Stewart's 1955 Packard 400
|
||||
---|---|---|---|---|
Home away from home
|
Thanks for all that info. I now have all those lights working with the different door jamb switches. I think I still need to wire in the map light, glove box light, and the small light on the ignition.
I got the tail light seals this week. I am a little confused. I seem to have more seals than needed. There are two that are shaped somewhat alike. One is wide and one is narrow. I know where the narrow one goes but not the thicker one that is marked in red in the image below. Also, I think the long one that is rolle dup goes around the whole thing between the car body and the crome frame.
Posted on: 2023/11/2 14:44
|
|||
Stewart Ballard
|
||||
|
Re: Stewart's 1955 Packard 400
|
||||
---|---|---|---|---|
Home away from home
|
I have a new pair of lenses on the way from Gerry. I just assumed that a decent pair would be hard to find. Those exterior parts take a beating.
I have a question about these courtesy lights. If I am reading the wiring image correctly. The light with 1 wire comes on with the tail lights and the one with 2 wires comes on anytime the dome lights are on. Is that correct?
Posted on: 2023/11/1 12:40
|
|||
Stewart Ballard
|
||||
|