Re: PackardInfo.com Shirts
|
||||
---|---|---|---|---|
Just popping in
|
Sure, I'd take 2; 1 each 2XL and XL.
Posted on: 2017/9/13 19:06
|
|||
|
Re: 2016 Salado Meeting Location Change
|
||||
---|---|---|---|---|
Just popping in
|
I'm planning to be there, unless my employer has me on the road
Posted on: 2015/9/4 11:13
|
|||
|
Re: Brake light switch- '55 Clipper
|
||||
---|---|---|---|---|
Just popping in
|
I've read a good bit of anecdotal information on it frequently occurring, especially with DOT 5. Connection or not, who knows.
Thanks for the input all. Going to drop the new one in this evening.
Posted on: 2015/8/27 17:24
|
|||
|
Re: Brake light switch- '55 Clipper
|
||||
---|---|---|---|---|
Just popping in
|
Thanks JW. From what I've read, the silicone brake fluids are killers on these switches. I'd like to keep it original for now. Play it by ear on switching to a mechanical switch. I figured that this was a perfect opportunity to get introduced to this site.
And thanks for the welcome guys.
Posted on: 2015/8/27 7:05
|
|||
|
Re: Brake light switch- '55 Clipper
|
||||
---|---|---|---|---|
Just popping in
|
It's a Super. Yes, the voltage is present on the leads, and everything else on the circuit is good to go. If I close the circuit independent of the switch, the lights come right on, so the wiring itself is also good.
Thanks for the help!
Posted on: 2015/8/26 20:38
|
|||
|
Brake light switch- '55 Clipper
|
||||
---|---|---|---|---|
Just popping in
|
First post, and I would guess that my question has been asked before, but I couldn't find it.
I just picked up a '55 Clipper the other day, and discovered that my brake lights don't come on when the pedal is depressed. I narrowed it down to the switch (2 wire, not 3), and have one on it's way. It would seem that it is a common failure item. My question is: when the new one is installed, is it necessary to bleed the brakes? I'm thinking yes, but thought I'd ask those who have been there. Thanks in advance!
Posted on: 2015/8/26 20:15
|
|||
|