Re: For Sale 1937 Packard Super Eight, 1500 Series
|
||||
---|---|---|---|---|
Not too shy to talk
|
SOLD, no longer available.
Posted on: 2020/5/11 12:33
|
|||
|
1937 Packard Super Eight fuel tank sending unit
|
||||
---|---|---|---|---|
Not too shy to talk
|
Does anyone know the correct ohms at empty and full that the gas tank sending unit should produce to correctly put the fuel gauge at empty and full. I currently get 6.5 ohms at empty and 44 ohms at full. This only puts the gauge between 1/4 and 3/4. This would be on a 1937 Super Eight. Thanks
Posted on: 2019/10/18 9:43
|
|||
|
1937 Packard Super Eight head torquing sequence
|
||||
---|---|---|---|---|
Not too shy to talk
|
Can someone provide a diagram of the torquing sequence of the head bolts on a 1937 Packard Super Eight engine.
Posted on: 2019/9/25 20:32
|
|||
|
Replacement oil filter element for a 1937 Packard Super Eight
|
||||
---|---|---|---|---|
Not too shy to talk
|
Does someone sell a oil filter element for a 1937 Packard Super Eight.
Posted on: 2019/9/16 18:30
|
|||
|
1937 Packard 120 green color
|
||||
---|---|---|---|---|
Not too shy to talk
|
What was the lightest shade of green used by Packard in 1937 on the 120 model. This green is so light it looks like it is almost silver but it is green. Thanks
Posted on: 2018/5/4 16:41
|
|||
|
Re: 1937 Packard Wheels
|
||||
---|---|---|---|---|
Not too shy to talk
|
Just need measurements for 1937 junior and 1937 Super Eight. I do need 37 packard v12 wheel measurements which I think takes a 8.25X16" tire, 6 lug bolts which may be a larger diameter and I think the wheel pattern is 6 holes in a 6-1/2" circle (6X6-1/2). I am inclined to think the 37 "120" and "Super Eight" have a bolt pattern of 5 holes in a 5" circle or (5X5). Only difference just may be the center hole.
Posted on: 2018/1/16 15:12
|
|||
|
Re: 1937 Packard Wheels
|
||||
---|---|---|---|---|
Not too shy to talk
|
Yes, I am going to a swap meet and I will only have a tape measure to identify wheels: I want to know for the1937 junior and senior wheels: what is the width, diameter of the large center hole and the wheel pattern of the wheel bolt holes.
Posted on: 2018/1/16 10:03
|
|||
|
1937 Packard Wheels
|
||||
---|---|---|---|---|
Not too shy to talk
|
Can someone tell me the difference between steel wheels used on the 1937 Packard 120 and the 1937 Super Eight if there is any. I know each used a 16" wheel but is the center hole the same diameter and were the bolt pattern and wheel width the same? Thanks
Posted on: 2018/1/15 20:11
|
|||
|