Packard Forum Index » Pre-War (1899-1942)

Topic: Pinstriping on a 1932 901

Bottom

Previous Topic

Next Topic Register To Post

« 1 (2) 3 »

Tim Cole

Re: Pinstriping on a 1932 901

#11

Home away from home

I guess there are a few anomalies in the Turnquist picture that I forgot about. The striping dimensions are not defined, the striping for the wheels is not defined, and I think there should be a stripe on the vent door section of the hood.

However, if the color scheme used is not one of the standard schemes things go out the window because the photographic record shows variations in striping for non-standard paint orders.

Posted on: 2016/10/23 5:29

Marty or Marston

Re: Pinstriping on a 1932 901

#12

Home away from home

Tim,

That's a bit of news that cuts down on the worry about how it should be done and line widths. I prefer thinner stripes and was thinking about 2 mm for the body and two stripes on the wheels of 3 and 2 mm.

The wife would like to see a stripe on each fender in the raised area at the outside edge and the main body of the fender.

We are thinking of a gold or gold bronze color.

Posted on: 2016/10/23 16:35

Marty
Big Sister
Little Sister (SOLD)
Baby

BDC

Re: Pinstriping on a 1932 901

#13

Home away from home

My 32 902 still has the remains of the original pinstripe, should I redo it or leave it original? The rest of the car is still fully original.

Posted on: 2016/12/12 17:31

I can explain it to you but I can't understand it for you

Bad company corrupts good character!

Farming: the art of losing money while working 100 hours a week to feed people who think you are trying to kill them

Owen_Dyneto

Re: Pinstriping on a 1932 901

#14

Forum Ambassador

If you intend to leave the vehicle fully as found original, I wouldn't touch the striping (or anything else for that matter). But I would carefully photodocument the striping for future reference. There is a thread on the PAC forum titled "Original Detail Features" and that would be a preferred place to post those photos.

Posted on: 2016/12/12 18:27

Packardbarry

Re: Pinstriping on a 1932 901

#15

Home away from home

Interesting photo of the wheel. If i was a betting man i would say the 2 strips r diff colors.

Posted on: 2016/12/13 9:13

Marty or Marston

Re: Pinstriping on a 1932 901

#16

Home away from home

Thanks for the additional inputs. I agree with Packardberry that the wheel seems to have two different colors of striping on them.

BDC could you please take some photos of your 902 striping and measure the width of the line?

Posted on: 2016/12/17 11:05

Marty
Big Sister
Little Sister (SOLD)
Baby

BDC

Re: Pinstriping on a 1932 901

#17

Home away from home

Marston, I sure can do. Any specific areas you are interested in? A lot of the pin striping has been polished away over the 5 decades of showing the car.

Posted on: 2016/12/17 15:51

I can explain it to you but I can't understand it for you

Bad company corrupts good character!

Farming: the art of losing money while working 100 hours a week to feed people who think you are trying to kill them

Marty or Marston

Re: Pinstriping on a 1932 901

#18

Home away from home

I would like to see photos of areas where there is a change in direction e.g. the point of the arrow on the hood for example. Measurements as to the distance from the a rise in the belt would be nice too,

Does your car still have the original interior?

Posted on: 2016/12/17 18:26

Marty
Big Sister
Little Sister (SOLD)
Baby

BDC

Re: Pinstriping on a 1932 901

#19

Home away from home

Yes still original interior

Posted on: 2016/12/17 19:51

I can explain it to you but I can't understand it for you

Bad company corrupts good character!

Farming: the art of losing money while working 100 hours a week to feed people who think you are trying to kill them