Packard Forum Index » Post-War (1946-54)

Where can I find info on instrument panel removal procedure for a 22nd series? Thanks.

Have you tried using the "Search" tool?, this topic has come up and been addressed several times in the past.

When you find the articles, they will help. Here's a picture of the back of the dash. I believe the cluster is held in with 2 bolts on the bottom that bolt to the dash (picture shows the holes) and 2 nuts attached to the middle of each side of the gauge cluster (clear in picture on the left side). I believe this should loosen it to come forward. Careful with the wires. Hope this helps.

Joe

Attach file:

---

  (58.82 KB)

You might try here, or maybe here.

Thanks for the pictures.