Packard Forum Index » V-8 (1955-56)

Topic: Brake Fluid Reservoir

Bottom

Previous Topic

Next Topic Register To Post

« 1 (2) 3 4 »

Marty or Marston

Re: Brake Fluid Reservoir

#11

Home away from home

Thanks for all of the inputs. It took about 30 minutes to install the kit. As voiced on this blog a brake bleed was not needed. I needed to squash the three female electrical connectors a bit to get them to fit snugly. Topped off the jar with fluid. Brake lights now work.

Best of all the other half of the family is smiling as she can now drive the car.

Next project is to rebuild the carburetor of the '51 200 sedan.

Posted on: 2017/11/6 17:26

Marty
Big Sister
Little Sister (SOLD)
Baby

Owen_Dyneto

Re: Brake Fluid Reservoir

#12

Forum Ambassador

Always nice to hear of a happy outcome!

Posted on: 2017/11/6 18:19

acolds

Re: Brake Fluid Reservoir

#13

Home away from home

The jars can be purchased I borrowed a spare setup Randy Berger had made pictures of his OEM setup found a source for the jars planning to make a few setups that will be close to it. The bottom retainer for jar show correct per the one on Randy's 400

Attach file:

(122.15 KB)

(113.05 KB)

Posted on: 2017/11/6 18:37

C:\Users\veron\Desktop\New folder\1956 Packard Caribbean\753.jpg

HH56

Re: Brake Fluid Reservoir

#14

Forum Ambassador

If you do make some repros I would be interested in buying one or two.

Posted on: 2017/11/6 19:38

Howard

JWL

Re: Brake Fluid Reservoir

#15

Home away from home

Quote:

HH56 wrote:
If you do make some repros I would be interested in buying one or two.

Wendell Spreadbury in Texas was selling after market remote brake fluid reservoirs at the Texas Packard Meets. The were machined out of aluminum billet and came with all the tubing and connections. He is listed in the PAC directory. JWL

Posted on: 2017/11/7 11:54

We move toward
And make happen
What occupies our mind... (W. Scherer)

Marty or Marston

Re: Brake Fluid Reservoir

#16

Home away from home

As a follow question on this matter, My system reservoir developed a leak at the fitting and the plug on the master cylinder that completely drained the jar's contents onto the garage floor. I've repaired the leak and now need to refill the jar. What do I need to do to see that the fluid gets to the master system correctly?

Posted on: 2017/12/13 23:22

Marty
Big Sister
Little Sister (SOLD)
Baby

Randy Berger

Re: Brake Fluid Reservoir

#17

Forum Ambassador

If the fittings are snugged tight they will automatically siphon brake fluid from the jar as the system is bled or brakes adjusted. Nothing else is required.

Posted on: 2017/12/14 0:22

Marty or Marston

Re: Brake Fluid Reservoir

#18

Home away from home

Randy,

Thanks for your help. Sure couldn't ask for anything easier than that.

Posted on: 2017/12/14 11:24

Marty
Big Sister
Little Sister (SOLD)
Baby

Mike Hammerberg

Re: Brake Fluid Reservoir

#19

Quite a regular

Link to Blueprints
http://gus-stories.org/Packard/blueprints.htm

Posted on: 2017/12/15 1:05

BigKev

Re: Brake Fluid Reservoir

#20

Webmaster

Acolds,

Any update on reproducing these?

Posted on: 2018/10/15 14:01

-BigKev

1954 Packard Clipper Deluxe Touring Sedan -> Registry | Project Blog

1937 Packard 115-C Convertible Coupe -> Registry | Project Blog

Board index » Discussion » V-8 (1955-56) » Brake Fluid Reservoir

Top

Previous Topic

Next Topic

« 1 (2) 3 4 »

	';
Hello and welcome to Packard Motor Car Information! If you're new here, please register for a free account.