The Most Comprehensive Free Online Reference for Packard Owners
Become a member of Packard Motor Car Information, right now! (it's free)
Login
Username:

Password:

remember me

Lost Password?

Register now!
FAQ's
Main Menu
Recent Forum Topics
Who's Online
59 user(s) are online (41 user(s) are browsing Packard Forums)

Members: 1
Guests: 58

Lonny, more...





1940 Super 8 - Rear Light Bulb
Home away from home
Joined:
2018/10/28 16:42
From Bruce, MI
Posts: 116
What is the correct procedure to accessing and changing the rear stop/turn signal light bulb in my formal sedan (1807)?

I have removed the regular slotted screw on the top of the unit but nothing happens nor does anything move easier. I looked in the trunk and see no access. If I remove the rear wheel and stick my head in the wheel well, I see there are two nuts (besides me) in proximity to the stop/turn indicator... Is this the access to that light socket and bulb?

Thanks

Posted on: 7/14 14:25:16
Transfer the post to other applications Transfer


Re: 1940 Super 8 - Rear Light Bulb
Home away from home
Joined:
2010/12/19 13:58
From Long Island, NY
Posts: 377
I just did mine and all you do is remove the top slotted screw and carefully pull straight out the red glass lens and chrome surround......carefully! In other words don't drop the glass lens. You may have to wiggle it a little bit to slide it out.

Steve

Posted on: 7/14 14:45:10
Transfer the post to other applications Transfer


Re: 1940 Super 8 - Rear Light Bulb
Home away from home
Joined:
2018/10/28 16:42
From Bruce, MI
Posts: 116
Thanks. I tested this process on one of my lights and it worked perfectly. The other light appears to have had the rubber gasket fuse to both the housing and the glass lens.

I am debating if I should apply a flame to the glass to soften the gasket...

Posted on: 7/15 17:56:48
Transfer the post to other applications Transfer


Re: 1940 Super 8 - Rear Light Bulb
Forum Ambassador
Joined:
2007/3/14 16:01
From New Jersey
Posts: 15715
Nothing to debate, do NOT apply a flame to the glass lens. If you feel you must use heat, start by trying something indirect and very gentle, for example a hot air hair dryer.

Posted on: 7/15 18:04:38
Transfer the post to other applications Transfer


Re: 1940 Super 8 - Rear Light Bulb
Home away from home
Joined:
2018/10/28 16:42
From Bruce, MI
Posts: 116
Thanks.
With a little hot air and (over night) silicone spray, was able to soften up the sticky rubber to the rear lens. I used a large paper clip , bent the end of it to a 90 degree angle and was able to get behind part of the lens and pull it out.

Posted on: 7/16 14:05:44
Transfer the post to other applications Transfer


Re: 1940 Super 8 - Rear Light Bulb
Home away from home
Joined:
2008/2/16 15:39
From Santa Fe
Posts: 5257
I have had good luck using PB Blaster to soften rubber. JWL

Posted on: 7/17 9:03:39
_________________
We move toward and make happen what occupies our mind. (W. Scherer)
Transfer the post to other applications Transfer


Re: 1940 Super 8 - Rear Light Bulb
Home away from home
Joined:
2018/10/28 16:42
From Bruce, MI
Posts: 116
Great Suggestion. I live for PB Blaster. It works great on my 70 year old radiators!

Any issue with replacing the rubber lens gaskets with cork?

Posted on: 7/17 16:41:52
Transfer the post to other applications Transfer


Re: 1940 Super 8 - Rear Light Bulb
Home away from home
Joined:
2008/10/31 12:20
From Portland, Oregon, USA
Posts: 1342
If you have ArmorAll, spray it on heavy and gently work around the rubber with a wooden skewer or tongue depressor. Easy does it or you'll have to buy a new one from Steele Rubber. That's your backup. The one in there is pre-war real rubber most likely.

Posted on: 7/17 16:45:01
Transfer the post to other applications Transfer


Re: 1940 Super 8 - Rear Light Bulb
Home away from home
Joined:
2016/3/13 15:24
From Coalmont, B.C., Canada
Posts: 632
You could also go to any 'rubber house' that sells sheet rubber and buy a square foot of 1/16" neoprene and trace your old one onto it with a pen and cut it out with a good pair of scissors, or a super-sharp utility knife. Hole punches for the machine screws and you're in biz. Chris

Posted on: 7/17 19:08:01
_________________
'If you think you can, or you think you can't, you're right!' Henry Ford

1939 Six, Model 1700

http://packardinfo.com/xoops/html/modules/registry/index.php?Action=view&ID=1823
Transfer the post to other applications Transfer







[Advanced Search]


Search
Recent Photos
1936 120 (2019/11/26)
1936 120
1680 1120 (2019/11/2)
1680  1120
1680 x 1120 (2019/11/2)
1680 x 1120
56 Exewcutive Light Painting ... (2019/10/24)
56 Exewcutive Light Painting ...
56 Exewcutive Light Painting ... (2019/10/24)
56 Exewcutive Light Painting ...
Random Photo
1951 Packard Mayfair, nine-tenths right rear view
Helping Out
PackardInfo is supported and funded by user donations. If you would to help out by either donating content, or funds to help with the upkeep and hosting of this site please EMAIL ME or click on the donate button.