Happy Easter and welcome to Packard Motor Car Information! If you're new here, please register for a free account.  
Login
Username:

Password:

Remember me



Lost Password?

Register now!
FAQ's
Main Menu
Recent Forum Topics
Who is Online
84 user(s) are online (54 user(s) are browsing Forums)

Members: 1
Guests: 83

bertus cardinaal, more...
Helping out...
PackardInfo is a free resource for Packard Owners that is completely supported by user donations. If you can help out, that would be great!

Donate via PayPal
Video Content
Visit PackardInfo.com YouTube Playlist

Donate via PayPal



« 1 ... 13 14 15 (16) 17 18 19 ... 24 »

Re: Ken's 1937 115C Touring Sedan
Home away from home
Home away from home

Ken_P
See User information
Just noticed that my picture didn't upload, so I guess no one else understood my last post. This should help.

Finally have a few days off, and I'm mostly helping my wife and bonding with my son, but I have been doing a little bit of research. Not too much luck finding parts, but that's ok, because the guy I would ask to pick them up for me is pretty busy this time of year. I should be back CONUS about two and a half years, so I have plenty of time.

I did buy some books on Amazon the other day though, so I'll spend some time learning more about the history of Packard.

Attach file:



jpg  (67.59 KB)
2964_4fbdcf46df38e.jpg 717X960 px

Posted on: 2012/5/24 1:03
1937 120 1092 - Original survivor for driving and continued preservation.
http://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=16514&forum=10

1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?start=0&topic_id=6550&order=ASC&status=&mode=0
 Top  Print 
 


Re: Ken's 1937 115C Touring Sedan
Forum Ambassador
Forum Ambassador

Ozstatman
See User information
Congratulations Dad!

Posted on: 2012/5/24 1:07
Mal
/o[]o\
====

Bowral, Southern Highlands of NSW, Australia
"Out of chaos comes order" - Nietzsche.

1938 Eight Touring Sedan - SOLD

1941 One-Twenty Club Coupe - SOLD

1948 Super Eight Limo, chassis RHD - SOLD

1950 Eight Touring Sedan - SOLD

What's this?
Put your Packard in the Packard Vehicle Registry!
Here's how!
Any questions - PM or email me at ozstatman@gmail.com
 Top  Print 
 


Re: Ken's 1937 115C Touring Sedan
Home away from home
Home away from home

Ken_P
See User information
This post is almost a year overdue, but that's ok. Life is busy sometimes. I was able to take some leave last June and get back to Idaho, and I pulled the Packard out of the barn. She started without jumping starting after sitting alone for 8 months. I primed the carb, and then as soon as I got it down the hill, shut it off and added water, because I didn't check it before I started it and it turns out I had a cold leak. I didn't check things too throughly before trying to start it because, well, I didn't expect it to just start!

We drove it around a little- probably 15 miles or so, and I got to give my son his first ride in a Packard! Mom wasn't so sure (no carseat or seatbelt), but we took it slow and he had a ball.

Headed back to the mainland in a few months for at least two years, and I'm starting to have the time to scheme about what to do next.

Attach file:



jpg  (93.87 KB)
2964_53577da719d5e.jpg 960X642 px

jpg  (102.93 KB)
2964_53577db9850d2.jpg 960X642 px

Posted on: 2014/4/23 3:45
1937 120 1092 - Original survivor for driving and continued preservation.
http://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=16514&forum=10

1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?start=0&topic_id=6550&order=ASC&status=&mode=0
 Top  Print 
 


Re: Ken's 1937 115C Touring Sedan
Just popping in
Just popping in

warf
See User information
Nice when they start after a long time in the garage, wish mine would..lol..Call me when you get to Idaho again for a little show and tell or something...208 245 4570 Thanks again for your service in the Navy...Bob

Posted on: 2014/5/8 8:32
 Top  Print 
 


Re: Ken's 1937 115C Touring Sedan
Home away from home
Home away from home

Ken_P
See User information
Well, I finally have orders in hand, and it looks like I'm going to be living in Northern VA for three years. I'll get some time off this summer, and then drive across the country at the beginning of August. Looking forward to it, and now I just have to find a house with a garage and patient landlords!

Still looking for a set of front fenders...

Posted on: 2014/5/10 14:01
1937 120 1092 - Original survivor for driving and continued preservation.
http://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=16514&forum=10

1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?start=0&topic_id=6550&order=ASC&status=&mode=0
 Top  Print 
 


Re: Ken's 1937 115C Touring Sedan
Forum Ambassador
Forum Ambassador

Ozstatman
See User information
Ken,

The seller of this eBay listing for 37 rocker panels also says he has 120 front fenders!

Posted on: 2014/5/11 20:40
Mal
/o[]o\
====

Bowral, Southern Highlands of NSW, Australia
"Out of chaos comes order" - Nietzsche.

1938 Eight Touring Sedan - SOLD

1941 One-Twenty Club Coupe - SOLD

1948 Super Eight Limo, chassis RHD - SOLD

1950 Eight Touring Sedan - SOLD

What's this?
Put your Packard in the Packard Vehicle Registry!
Here's how!
Any questions - PM or email me at ozstatman@gmail.com
 Top  Print 
 


Re: Ken's 1937 115C Touring Sedan
Home away from home
Home away from home

Ken_P
See User information
To those in the know: good price? It seems reasonable to me, and it would save me a ton of labor.

Posted on: 2014/5/11 20:57
1937 120 1092 - Original survivor for driving and continued preservation.
http://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=16514&forum=10

1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?start=0&topic_id=6550&order=ASC&status=&mode=0
 Top  Print 
 


Re: Ken's 1937 115C Touring Sedan
Home away from home
Home away from home

David Grubbs
See User information
The rocker panels look a little bit pricey, but I don't know of anyone reproducing the early model ones. You can get 51-54 inner and outer panels for about $25 each, but they are not exact copies, and take a little bit of adjusting to make them fit. Having said that, having a factory part in good shape is money well spent. Fabricating something that complicated will eat up a lot of time. I'd go for it, and maybe you can get a special deal on the fenders. Plus he's in Fort Collins Co - you could drop south on your way back and pick them up!

Go Navy! Three years as a communications/crypto guy, then 21 as a CEC officer. Finally figured out my body doesn't like large bodies of water....

Posted on: 2014/5/11 21:39
 Top  Print 
 


Re: Ken's 1937 115C Touring Sedan
Home away from home
Home away from home

Ken_P
See User information
Well, it has been a very long time since I've updated, and a few things have happened:

- We are all set up in Saratoga Springs, NY.

- I have the car in the garage, and the garage all set up.

- Planning on sending a Carter WA-1 to Daytona carb for rebuild/restoration. Before I do- is this the correct carb? I know Chandler Groves was the original carb, but I also have heard that they are not worth using. I thought it was correct when I got it three years ago, but now I can't find the documentation. I'll get back into practice later.

- Front end is removed. I have to fix the engine paint- a few cold water leaks caused some peeling paint while it was in the barn. I hate re-work, but so it goes.

- Plan for the the winter is to restore all the bits that I ran out of time last time I was on shore duty- generator, finish the starter, air filter, etc. etc.

- Also need to flip the ring gear and planning on getting a new clutch or get mine rebuilt.

EDIT: Disregard about the carb. I searched harder, and answered my own question. The Carter WA-1 477S is the correct carb- now I just have to send it off to Daytona.

- Buying a welder this weekend, so I'll be able to start stitching metal together.

Pictures to follow. I have a rather huge list of things to do before bodywork, and then I'll tackle body work. Working into the hard stuff.

Posted on: 2014/9/16 21:54
1937 120 1092 - Original survivor for driving and continued preservation.
http://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=16514&forum=10

1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?start=0&topic_id=6550&order=ASC&status=&mode=0
 Top  Print 
 


Re: Ken's 1937 115C Touring Sedan
Home away from home
Home away from home

Ken_P
See User information
It has been a while since I've posted.

Hauled the car from Idaho to Saratoga Springs, NY.

I've gotten the front end off, and started stripping down the car. I want to get the mechanical stuff 100%, and then I'll move into body work.

The car smoked quite a bit, so I pulled the head for an inspection. Compression numbers were good a few years ago, but I want the car to not smoke, and now is the right time to go through it. I am planning on doing an in-car overhaul. There is a crack between 5 and 6 on the drivers side of the block, so I don't want to put money into machine work, thus not planning a full rebuild. My plan:

0. Epoxy repair the crack. I am thinking JB weld. It leaks cold, no leaks hot.
1. New rings
2. Inspect bearings and replace if required
3. Clean pistons and valves
4. Valve grind. I think I can do it myself, in car, based on some posts I read on the forum.
4.5. Inspect valve guides to see if a worn valve guide is the cause of my smoke. I don't have enough run hours to reasonably discuss oil level changes.
5. New timing chain?

Is there a way to tell if the pistons are stock other than measuring? They appear to be stamped 9 3 on top, but it's hard to tell, since I haven't cleaned them off yet.

Open to suggestions or better ideas from people who have done this before. I haven't done a full restoration before.

I also found a new crack in the exhaust manifold. I had a previous crack welded up, and it is now cracked next to the old crack. Should I look for a new manifold, or do they all crack there? My concern is that the engine only has a few hours of run time since the manifold was repaired before. I am also going to have to find different manifold paint. I put several coats of Hirsch paint on it 3 years ago, and you can see in the pictures how poorly the paint fared. How do the pros do it?

Once all of that is done, I'll restore all the ancillary parts as I reassemble- distributor, generator, water pump, etc. The water pump leaked slightly, so I will rebuild it. The starter is done, but I may touch it up.

I also need to repaint the block. I hate rework. You can see in the pictures where the paint peeled off. I've never had anti-freeze eat paint. For prep, I wire wheeled the engine to bare metal, degreased it, and painted it. Does the Hirsch engine paint need a primer? It didn't mention that on the can or in the instructions.

Then I have to fix leaking brakes. The brand new three years ago master cylinder leaks like a sieve, so I guess I will have to rebuild it. A few of my new brake lines are leaking too. The flares looked fine, and the wheel cylinders are new. I am wondering if I just didn't tighten them enough to crush a little between the flared line and the fitting. I was afraid of over-tightening, but I'm wondering if I limp-wristed it. Thoughts?

Much work, but it's fun. I will probably be a little less excited when it is February in my uninsulated garage!

Attach file:



jpg  (54.04 KB)
2964_542211d83cb7d.jpg 1280X723 px

jpg  (72.28 KB)
2964_5422120e76ab5.jpg 1280X723 px

jpg  (79.52 KB)
2964_54221218a6a21.jpg 1280X723 px

jpg  (81.13 KB)
2964_5422122bd8272.jpg 723X1280 px

jpg  (78.22 KB)
2964_54221238b32f0.jpg 723X1280 px

jpg  (73.46 KB)
2964_5422124320ced.jpg 1280X723 px

jpg  (91.54 KB)
2964_54221250dcf24.jpg 723X1280 px

jpg  (64.33 KB)
2964_5422125e83bc8.jpg 723X1280 px

jpg  (72.64 KB)
2964_5422126875ec9.jpg 723X1280 px

Posted on: 2014/9/23 19:44
1937 120 1092 - Original survivor for driving and continued preservation.
http://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=16514&forum=10

1937 115 1082 - Total basket case, partial restoration, sold Hershey 2015
https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?start=0&topic_id=6550&order=ASC&status=&mode=0
 Top  Print 
 




« 1 ... 13 14 15 (16) 17 18 19 ... 24 »




Search
Recent Photos
Photo of the Day
Recent Registry
Website Comments or Questions?? Click Here Copyright 2006-2024, PackardInfo.com All Rights Reserved