Happy Easter and welcome to Packard Motor Car Information! If you're new here, please register for a free account.  
Login
Username:

Password:

Remember me



Lost Password?

Register now!
FAQ's
Main Menu
Recent Forum Topics
Who is Online
152 user(s) are online (92 user(s) are browsing Forums)

Members: 2
Guests: 150

Dads 56, BigKev, more...
Helping out...
PackardInfo is a free resource for Packard Owners that is completely supported by user donations. If you can help out, that would be great!

Donate via PayPal
Video Content
Visit PackardInfo.com YouTube Playlist

Donate via PayPal




Carburetor help
#1
Just popping in
Just popping in

asis
See User information
I have recently revived a 57' Clipper. After overhauling and repairing the ignition, cleaning the fuel system etc. We were able to get it to run intermittently. Diagnosing a fuel delivery problem, I opened up the carb and found the float hanging on the carb body and or hinge pin and now have it running at idle till the cows come home. It will fire right up cold or warm and idle like a dream.
The accelerator pump is of course toast however, even with a slow advance of the throttle there is a distinct and definite dead spot between idle and primary circuits. Once and when able to get it on the primary circuit it seems to be ok but hard to tell with the exhaust leaks for sure.
I have checked for vacuum leaks externally and can not locate any. I have yet to block off the brake vacuum and the distributor advance.

There is no ID tag on the 2Brl Stromberg carb and best I can find from research is it should be a WW series. Neither can I find any parts or resources for these carbs.

Am looking for resource for parts or info on other model carbs that will not require major modifications to work.
There is no supercharger (either removed or not equiped?).
All I have been able to locate for replacement carb's both either have manual choke and or require an adapter to mount to the 1 7/8"x 3 1/4" bolt pattern for the manifold.

Even a temporary standin carb would suffice for now so we can get it out of Ma's backyard and on the drive to begine brake and exhaust work to get it at least drivable and back on the road.

TIA for any help.

Scott

Posted on: 2015/8/27 12:57
 Top  Print 
 


Re: Carburetor help
#2
Just popping in
Just popping in

asis
See User information
Just to update for any use to anyone in the future.

It seems the current carb is not the original. The one we have is a Stromberg AAUV-26 model which is for 1951-1952 Studebaker, as well as 41'-47' Hudson....

Have located and ordered a kit.

Studebakerparts.com and Mike Carburetor Parts websites were helpful and also have parts and kits for the original Stromberg with supercharger for 57'-58' Clippers.

Posted on: 2015/8/28 13:14
 Top  Print 
 








Search
Recent Photos
Photo of the Day
Recent Registry
Website Comments or Questions?? Click Here Copyright 2006-2024, PackardInfo.com All Rights Reserved