The Most Comprehensive Free Online Reference for Packard Owners
Become a member of Packard Motor Car Information, right now! (it's free)
Login
Username:

Password:

remember me

Lost Password?

Register now!
FAQ's
Main Menu
Recent Forum Topics
Who's Online
27 user(s) are online (20 user(s) are browsing Packard Forums)

Members: 1
Guests: 26

John Iaccino, more...



(1) 2 3 »


Eric's 1956 Patrician STS Restoration Project
Home away from home
Joined:
2006/5/29 19:02
From Kansas
Posts: 3707
Since our gracious host gave us a spot to chronicle the development of our beloved Packards, I decided to explain mine in a lot more detail here than I have on other areas of the web.

So, let's start out by explaining the title of this thread, "Eric's 1956 Patrician STS Restoration Project", STS of course for "Sports Touring Sedan". The idea here is to make a Packard with the power, agility, comfort, and luxury of the best of today's sports sedans. This will entail updating the engine to a higher output, updating the transmission to include an overdrive, and improving the suspension to include a larger sway bar in the front, a large one in the rear, 4 wheel disc brakes, and, possibly independent rear suspension, with T/L. (that's my BIG secret that I haven't told anyone about yet)

I feel that with these modifications, I'll be well on my way towards my goal of a Patrician STS. Oh, and I almost forgot, it will have full Caribbean trim, and be a 4 door Caribbean, with performance, luxury, and handling to outpace any car of the '50s, and a lot of ones from today.

To give an idea of this rather ambitious plan, here's a few details:

#1 374 supercharged (EFI possibly) engine
#2 T56 6 Speed transmission
#3 Fully independent suspension w/fully functioning T/L
#4 Four wheel disc brakes
#5 Improved sway bars front and rear
#6 Improved luxurious interior, front bucket seats, console, etc.
#7 Full Caribbean trim spec

Now, keep in mind, that this is NOT a street rod of any kind, more of a "What If" in the mold of Craig's Panther project, and to typify what a 2006 Packard Caribbean Sedan would look like. I feel that this can be done rather easily, but I can't reveal all my secrets just yet, so stay tuned!

Posted on: 2007/2/19 7:14
Transfer the post to other applications Transfer


Re: Eric's 1956 Patrician STS Restoration Project
Home away from home
Joined:
2006/5/29 19:02
From Kansas
Posts: 3707
Well, I found a pic of the O/D unit I'm planning on using for the AOD-T/U project, so here ya all go! This is the early Packard O/D unit, from 1951-1954, (I'm assuming, this pic is off E-bay) I just wanted everyone to get an idea of the length of the o/d unit, as compared to the V8 version, which is at least 6" longer.

Attach file:



jpg  Packard O:D trans.JPG (23.99 KB)
34_45e05eb663461.jpg 400X300 px

Posted on: 2007/2/24 7:50
Transfer the post to other applications Transfer


Re: Eric's 1956 Patrician STS Restoration Project
Home away from home
Joined:
2006/5/29 19:02
From Kansas
Posts: 3707
For some of you new members who haven't seen my supercharger setup on the Pat, here ya go:(notice that it all fits under the hood, and retains a total stock appearance from the outside.)

Attach file:



jpg  IM000588.JPG (50.06 KB)
34_45ef4c7107292.jpg 600X800 px

jpg  IM000589.JPG (32.49 KB)
34_45ef4c7ff1a11.jpg 640X480 px

jpg  IM000590.JPG (50.11 KB)
34_45ef4c8bea61e.jpg 640X480 px

jpg  IM000591.JPG (42.84 KB)
34_45ef4c979ec7c.jpg 640X480 px

Posted on: 2007/3/7 15:37
Transfer the post to other applications Transfer


Re: Eric's 1956 Patrician STS Restoration Project
Home away from home
Joined:
2006/6/15 7:12
From Woodridge, ILLINOIS
Posts: 540
I call that a sleeper. Slick Eric very Slick.

Posted on: 2007/3/8 4:05
Transfer the post to other applications Transfer


Re: Eric's 1956 Patrician STS Restoration Project
Home away from home
Joined:
2006/5/29 19:02
From Kansas
Posts: 3707
Thanks a lot, Tom. That's my plan, to look stock but have a "sleeper"

This weekend, I did another modification to the Pat, I went from 1955 looks to 1956 looks. Too bad the grille's broken on the driver's side, and the piece is missing. I still think it looks better than with that '55 grille and bumper on it.

Attach file:



jpg  IM000591.JPG (42.84 KB)
34_45f5f56cbd179.jpg 640X480 px

jpg  IMG_0243.JPG (42.30 KB)
34_45f5f580bd3a9.jpg 640X480 px

Posted on: 2007/3/12 17:52
Transfer the post to other applications Transfer


Re: Eric's 1956 Patrician STS Restoration Project
Home away from home
Joined:
2006/5/30 19:28
From USA
Posts: 6917
What kind of wiper motor is that???

Posted on: 2007/3/12 18:33
Transfer the post to other applications Transfer


Re: Eric's 1956 Patrician STS Restoration Project
Home away from home
Joined:
2006/5/29 19:02
From Kansas
Posts: 3707
That's the $200 '55-'57 Chevy repo. I presently have an original '55-'57 Chevy one on there now, saving the new one for emergencies. If you buy one, make sure you get the CAR version, not the truck. The truck will not work at all.

Posted on: 2007/3/12 18:50
Transfer the post to other applications Transfer


Re: Eric's 1956 Patrician STS Restoration Project
Home away from home
Joined:
2006/5/29 19:02
From Kansas
Posts: 3707
Something new for you guy's: You already know my difficulties with harmonic balancers, so this last weekend, I decided to try and find out the source of my oil leak. I now have a new timing cover seal on the front cover, and I don't have a leak there. So, I was thinking that since it's high up on the engine, it must be either the valve cover or the valley pan. I took the car to the car wash, cleaned off the engine with degreaser and a nice high pressure wash, and decided to drive it for a while to see if I could locate the source....

So, after driving at highway speeds for about an hour, I arrived at a friends house for a BBQ. I got out, popped the hood, and guess what? about 1/2 a quart was on the top of the engine! (I figure this by the dipstick reading) I start looking around, the valve cover's dry, the valley pan is drenched, and then I notice it: the oil filler tube....

Now, I had to shorten my oil filler tube about 3" to clear the supercharger, but this shouldn't matter. (And it did this before I cut the tube and put on the S/C) I pulled the tube out, and siliconed up the bottom end of it where it goes in the block. (the sides, NOT the end where the oil goes through!!) then drove it home.... Same thing when I got home, oil all over the tube!!

This has got me wondering, and looking pretty hard, then it hits me like lightening! The tube, is on the passenger side of the engine... the tube has NO baffle of any kind to restrict oil from flowing UP through the tube, it's just a straight tube. I found the old oil filler tube from the 374 that came out of the Pat, and low and behold, it has a baffle! So, when you have a straight tube above a spinning timing chain that's throwing oil UP the tube, you get one heck of a mess that's taken me quite a while to figure out what was causing it.

My reason for posting this is, if you notice oil on the valley pan area, take a flashlight and look down the oil filler tube, if you can see all the way through, there's the cause of your mess. OR, you can take your dipstick and stick it down there, if it goes down more than the height of your tube, you might need to find the baffled version. I don't know if this is a running change from '55 to '56, but my '55 Hash engine didn't have a baffle, while the '56 Packard engine did. One thing is for sure, I don't have any oil consumption anymore, and it was all because of that dang tube!

Posted on: 2007/3/20 9:49
Transfer the post to other applications Transfer


Re: Eric's 1956 Patrician STS Restoration Project
Home away from home
Joined:
2006/5/29 19:02
From Kansas
Posts: 3707
For those of you who were reading my list of "to do's" to the Pat, and can't figure out how I was going to put an independent rear suspension under it, here's a teaser to get your juices flowing:

Attach file:



jpg  20010616linc_rear.jpg (17.67 KB)
34_460829fae329d.jpg 390X295 px

Posted on: 2007/3/26 13:16
Transfer the post to other applications Transfer


Re: Eric's 1956 Patrician STS Restoration Project
Home away from home
Joined:
2006/5/29 19:02
From Kansas
Posts: 3707
You'll notice the two air bags... This is where I plan on attaching the rear load arms of the T/L suspension to. I plan on modifying the arms extensively, however. It's too bad that I can't park my car for a while to do this, as I could trade my arms to KevinAZ for his old ones, as I'll be cutting off the ends to make this work. I'm not giving all my secrets up just yet, but from all sides this appears to be an easy job.... (and I'll eat my words later, I know!)

Posted on: 2007/3/26 13:20
Transfer the post to other applications Transfer



(1) 2 3 »




[Advanced Search]


Search
Recent Photos
no title (2020/7/6)
no title
July 4th 2020 Parade Packard (2020/7/4)
July 4th 2020 Parade Packard
1947 packard (2020/7/2)
1947 packard
DSC05939.JPG (2020/6/27)
DSC05939.JPG
Anton Kneer (2020/6/13)
Anton Kneer
Random Photo
56th Texas Tour 1953 Mayfair 4.jpg
Helping Out
PackardInfo is supported and funded by user donations. If you would to help out by either donating content, or funds to help with the upkeep and hosting of this site please EMAIL ME or click on the donate button.