|
This Packard Parts Cross-Reference (X-Ref) Database provides a resource for Packard Owners to both search Parts that may Cross Reference to either other Makes/Models of Vehicles or to readily available parts from national part stores. Packard Owners can also add to the Database for benefit of other Packard Owners.
ACCESSORIES PART LISTING
| Part Description | Packard P/N | Packard Model | Model Years | New P/N | Brand | Vendor | Comments | Submitted by |
Backup Light Switch Assembly | PA443232 | all with Ultramatic, non-Gear-Start | 1951-54 | NS6499 | Echlin | NAPA | Blades for attaching wires
come out the sides instead of
the bottom, but otherwise
perfect match | JeromeSolberg |
Backup Light Switch Assembly | PA443232 | all with Ultramatic, non-Gear-Start | 1951-54 | LS249 | Standard Motor Products | Various | Also NAPA Echlin 6499. Blades
side instead of bottom
mounted. | JeromeSolberg |
Ballast Resistor | - | - | 1955-56 | ICR-115B | ECHLIN | NAPA | All models equipped with Autolite Systems | RSG |
Fan Belt | 351106 | 356 cu-in w/o ac | 1940-47 | 34500 | Dayco | - | Info from Ross:
Napa 25-30537
Dayco 34500
TR 30537 | JeromeSolberg |
Front wheel grease seal | - | 1955 Clipper | 1955 | 473157 | Timkin | - | Fits | 64avanti |
Front wheel bearing -outer | 419708 | 5567 | 1955 | TM 09067 | Timken | Rock Auto | Outer race listed under p/n
TM09195 | ScottG |
Gas Cap | - | all | 1951-1956 | G37 | Stant | old stock only | Correct vented cap. Chevy & other modern reproduction caps are non vented. | 64avanti |
Heater hose. V8's preformed. | - | all | 1955-1956 | - | - | - | Heater hose that goes from heater to head can be fashioned from a Gates 28468 or a Goodyear 63818. This hose shown in plate 29E, but not identified | PackardV8 |
looking for horn button 1940 model 110 | - | - | - | - | - | - | - | Vinnie |
moulded 90 degree elbow 5/8 heater hose new # | - | all | 55-56 | E80402 | Dayco | autozone | new number as a search for the two above
net 0 results . Poss outdated part
numbers | customclipper55 |
Oil Filter | - | All | 1955'1956 | P41 | Baldwin | Grainger, Motion products | A true premium filter | 64avanti |
Pilot bearing | - | V8 | 1955, 1056 | 204SF6 | MRC | - | Appears to be Packard only | 64avanti |
Pinion Seal - Diff | 6484093 | Patrician '56 | 1956 | 5778 | National | - | National 5778 good # in Australia, as is CR15788 (CBC Bearings). NAPA 15788 and Studebaker #199379X1 also possibilities in US. If pinion shaft yoke worn, speedi sleeve #99155 may suit. | JP |
radio push buttons | - | 1939 six | - | - | - | - | looking for 1939 packard radio push buttons. | lynn many cars |
Rear axle pinion seal | 6484109 | Patrician | 1956 | 5778 | National | - | Available in Australia, along with CR15788. Studebaker #199379X1 also a possible option. Speedi sleeve #99155 may suit if yoke worn. | JP |
ring style spring wire hose clamp for 5/8 htr hs | - | all | 50s and poss earlier | 58373n | ace hardware hardware assortment bins | ace | 80 cent ea | customclipper55 |
Seal | - | All | 55 56 | 472924 | Timken others | Parts stores Amazon | Replaces rope seal timing cover
crankshaft | Riki |
vacuum hose for 55-56 ease matic brakes | - | 50s | - | 11/32 | ArmorMark 50290 pcv hose | autozone | use 11/32 for a snug fit (8.7mm) use
wire spring clamp (ace hrdwr) 58368h
for fit on newer hose with slimmer
wall thickness. use 58369j for fit on
orig thicker wall orig hose. see notes
above htr hose wire clamp | customclipper55 |
Window Run Channel | - | 2-Door Hardtop/Convertible | 1951-1954 | 10-389X | Rubber the Right Way | Rubber the Right Way | For rear window run channel,
inside the door, below belt
line. Press fit. Flexible
unlike original. 1/8" opening
for stainless window frame to
slide in. | kevinpackard |
