Re: 1940 Brake Adjustment

Posted by Joseph Earl On 2012/8/13 20:37:55
An easy way to remove the old seal is to remove the drum and the outer bearing, then put the drum back on without the outer bearing, install the water and nut loosely, and pull the drum off with a little force when the washer contacts the inner bearing, so the washer pops the inner bearing and seal out.

Worked like a charm for me. No tool needed.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=107607