Re: Hot Air Car Intake

Posted by JWL On 2013/3/11 16:19:37

Rich, it should not be too difficult of a job to install a tube in the manifold with the manifold on a work bench. I would recommend just drilling through the plugs rather than trying to remove them to lessen the chance of cracking the manifold. A short section of the tube should extend beyond the manifold, top and bottom.

Also, this would be the best time to make sure the heat control valve is functioning. The two, auto choke and carb heat, go together for a smooth running and quickly warming up engine.

Howard's illustration should show you the way for both.

(o{}o)