Re: Is a phenolic spacer required for 35 Super 8 Fuel Pump?

Posted by Owen_Dyneto On 2014/2/3 9:04:20

The 1933-36 parts book for the Eight and Super Eight does list insulators, a set of 2 which I assume are for the bolts, and a single other number which I assume is the block that goes between the pump and the crankcase; they apply to all the Eights and Super Eights 33 to 36 (and probably before and after).

But even if that's in doubt, isn't it easy enough to check? Crank the engine over slowly and watch the stroke and positions of the fuel pump pushrod and compare those positions to the pump lever.