Re: Polish aluminum engine
Posted by Joe Santana On 2014/2/13 11:17:07
If a coating is being considered, here's one that works, is permanent and has heat dissipation properties.http://www.finishlinecoatings.com/misc.htmhttp://www.finishlinecoatings.com/
I had my manifolds and exhaust system done in cast iron and stainless steel (simulation). If you look at the other finishes they show online, you'll see chrome-likeand aluminum-like ceramic coatings. They coat the inside of pistons with one coating and the outside of pistons with another, on land-speed record cars. They know this stuff.
This picture was at 8,000 miles on the Duchess, but at 10,000 miles now and it looks no different. It stays looking new. Check it out.
Attach file:
(49.31 KB)
I had my manifolds and exhaust system done in cast iron and stainless steel (simulation). If you look at the other finishes they show online, you'll see chrome-likeand aluminum-like ceramic coatings. They coat the inside of pistons with one coating and the outside of pistons with another, on land-speed record cars. They know this stuff.
This picture was at 8,000 miles on the Duchess, but at 10,000 miles now and it looks no different. It stays looking new. Check it out.
Attach file:
(49.31 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=139433