Al:
Here is a picture of my heater hose routing. The upper heater outlet goes to the top of the water pump; the lower heater outlet goes to the engine's head.
As an aside, I fabricated a metal pipe that runs the length of the engine for the upper heater outlet hose rather than have a rubber hose draped over the engine. I did this mainly for looks. I used 3/4" copper tubing and had to make the brackets.
Hope this helps.
By the way, my car is a 1937 120.
Attach file:
(91.19 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=157417