Re: Dash & Oil line on a 1932 901
Posted by Marty or Marston On 2016/1/6 18:18:23
Dave,
Thanks for the information. I went through some pictures I took of a 1001 and found one of the oil pressure line. It comes off of the block and has several loops in it before it jogs off to the firewall. I can't tell what the OD, but this would seem to take care of engine body movement and would be simpler for me to handle.
On another note, but on the same subject, I'm getting ready to install the panel board (PB) on the firewall before the dash goes in. Should the PB go all the way up the firewall to the cowl or does it terminate before it gets there?
Again Thanks For The Input - Marty
Attach file:
(127.51 KB)
Thanks for the information. I went through some pictures I took of a 1001 and found one of the oil pressure line. It comes off of the block and has several loops in it before it jogs off to the firewall. I can't tell what the OD, but this would seem to take care of engine body movement and would be simpler for me to handle.
On another note, but on the same subject, I'm getting ready to install the panel board (PB) on the firewall before the dash goes in. Should the PB go all the way up the firewall to the cowl or does it terminate before it gets there?
Again Thanks For The Input - Marty
Attach file:
(127.51 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=170493