Dash & Instrument Panel on a '1932 901
Posted by Marty or Marston On 2016/2/24 11:41:32
I'm working on finishing the wiring on the dash and its installation. I'm assuming that the green circled holes are for the throttle and choke (see photo). Which hole (upper or lower) is correct for the throttle?
I only have 1 switch in my boxes of parts that seems like it would be for the dash (see photo), but it does not fit the red hole in the instrument panel. Is it a switch for this Packard and if so, what is it for? It is a pull switch and has three positions.
What goes in the blue circled hole? In addition, is there a chrome or nickel plated bezel that goes over the yellow circled hole for the keyed ignition?
It appears that the previous owner had both the clock and speedometer rebuilt. However, neither on seem to work. Does anyone out there have any recommendation?
Attach file:
(55.79 KB)
(74.51 KB)
I only have 1 switch in my boxes of parts that seems like it would be for the dash (see photo), but it does not fit the red hole in the instrument panel. Is it a switch for this Packard and if so, what is it for? It is a pull switch and has three positions.
What goes in the blue circled hole? In addition, is there a chrome or nickel plated bezel that goes over the yellow circled hole for the keyed ignition?
It appears that the previous owner had both the clock and speedometer rebuilt. However, neither on seem to work. Does anyone out there have any recommendation?
Attach file:
(55.79 KB)
(74.51 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=172788