Stone Guard on a 1932 901
Posted by Marty or Marston On 2016/3/25 11:23:24
I've started restoring the stone guard. There are a lot of breaks in the mesh and places where a short section of mesh is missing. I plan on silver soldering the breaks back together and to make, install and silver solder new pieces of brass in the area where the mesh is missing. Then I'll send the guard out to get it chrome plated.
My question pertains to mounting the guard. As I recall, I've seen pictures where it is mounted on both sides with a 'U" shaped bracket that goes over the head light bar and another "U" shape bracket that goes in front and partially around the radiator cap. I'm not sure that the bracket that goes around the radiator cap would fit on my radiator. Were there any other approaches for attaching the guard? If so, a few pictures would be great.
Attach file:
(102.62 KB)
My question pertains to mounting the guard. As I recall, I've seen pictures where it is mounted on both sides with a 'U" shaped bracket that goes over the head light bar and another "U" shape bracket that goes in front and partially around the radiator cap. I'm not sure that the bracket that goes around the radiator cap would fit on my radiator. Were there any other approaches for attaching the guard? If so, a few pictures would be great.
Attach file:
(102.62 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=174353