Re: Headlight Adjustments for '34 1101

Posted by Dell On 2016/6/20 19:38:23

There are two nuts and lock washers that hold the cover on, take off the nuts and the cover should fall off- might be enough dirt to hold it, should just pull off. There are inner and outer nuts on the two shafts, the outer cover is some times called a turtle and the plates that hold it on are bean shaped. the large bolt goes all the way over to the radiator, it and the inner nuts just need to be loosened up and the light should move. The parts in the picture should come off to expose the nuts that need to be loosened.

Attach file:

---

  (294.78 KB)