Re: Door alignment

Posted by Marty or Marston On 2018/3/30 2:36:57

I cut a slot in the welt so I could slip it in while the bolt was in place. I placed a piece of 30 lb (or so) felt paper between the frame and the splash aprons (heavy plastic would probably be OK too). I put the welt between the splash apron and the wood sill (not sure if that is correct but that's what I didI ordered may welt and steel pieces from a Macs (price).

Your hinge problem may just be due to rust. Suggest yu try to remove the pin and clean it up. Also before your try to align the doors you need to ensure that the hinges are tight and they are securely mounted to both frame and door.

Good Luck and keep us posted.