Re: 1940 Super 8 180 Read Seat removal
Posted by Joe Santana On 2018/11/28 18:19:47
If the bottom front of the seat cushion are popped out left and right, you should be able to lift and wiggle the cushion out. However:
There are hangers far right and left at the rear top of the seat back. They aren't screwed in, but they can be tight.
There are two screws and large washers at the bottom directly below the armrest holding the bottom of seat back. Plus two far left and right. You may need to loosen and lift the seat back up to get the seat cushion out.
Someone else may know better because my experience is with a leather interior.
Attach file:
(69.07 KB)
There are hangers far right and left at the rear top of the seat back. They aren't screwed in, but they can be tight.
There are two screws and large washers at the bottom directly below the armrest holding the bottom of seat back. Plus two far left and right. You may need to loosen and lift the seat back up to get the seat cushion out.
Someone else may know better because my experience is with a leather interior.
Attach file:
(69.07 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=207736