Re: Valve timing question
Posted by 32model901 On 2018/12/22 9:29:26
Not the best picture, but you can barely see the 0 and 0 on each tooth of the cam sprocket and the 0 on one tooth of the crank sprocket. The tooth on the crank sprocket with the 0 is lined up between the two 0's on thew cam sprocket.
Attach file:
(52.39 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=208195