Re: 1924 Packard 8 Transmission

Posted by Odd Moen On 2019/1/8 14:51:26
The dimension of the two types of needle bearings are shown in the attached photo. The bearing at the top is the main shaft front bearing (124354). These are from a 1929 transmission. A spacher (136772) is located between the end of the bearing and the main shaft. In front of the bearing you shall also find a Shaft Thrust Botttom Washer (116697) and Shaft Thrust Button (130776) to adjust the drive shaft end play to max .006`` (0.15mm)

Attach file:


jpeg  (200.39 KB)
1718_5c34fc94cfc43.jpeg 1440X1920 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=208540