Re: Packing rear axle bearings on a 39

Posted by dallas On 2019/3/2 20:18:25

Regarding the brake shoe hold-down pins== I have used the following pins when doing brake jobs on Packards. These are available on-line or any good auto parts store. The longer pins can be made to work by putting washers between head and backing plate, but why not use the correct parts!

Raybestos H1105 length 2 1/32 (number 2 on head)
Raybestos H1106 length 2 1/8 (number 8 or 12 on head)
Raybestos H1107 length 2 3/16 (number 3 or 4 on head)

Would purchase and have on hand as spares

Regards