Re: High beam indicator location?

Posted by Packard Newbie On 2019/4/28 13:29:48

Howard - thank you for that! Killer info, as usual. I will print this and take it to my 'wiring guy' and see if we can't 'track 'er down'. I agree with you that, according to the diagram, the indicator light could be on the left at, say 9:00 o'clock. I didn't look there and it is both difficult to get stuffed into the floor space of the car on one's back, and, in the case of my car, it is hard to see due to the rat's nest of wires up under there. I don't THINK the circuit has been converted to the seal beam wiring you reference, but not sure. I'll dig into it and report back, just in case anybody else is messing with the same issue. Thanks again for your time. Chris