Re: Routing of wiring harness, oil pressure line, temperature line in '37 120C
Posted by BDeB On 2019/8/21 22:09:49
The main wiring harness goes through an opening to the left of the dimmer switch and up behind the left kick panel inside the car to the instrument panel. Sorry but the photo quality is poor.
The oil pressure line goes up through a cutout in the lower firewall next to the speedometer cable and the hand throttle cable.
The temperature capillary goes up through a similar cutout on the left side of the firewall next to the armoured cable for the ignition coil.
Attach file:
(120.07 KB)
(105.09 KB)
(148.26 KB)
The oil pressure line goes up through a cutout in the lower firewall next to the speedometer cable and the hand throttle cable.
The temperature capillary goes up through a similar cutout on the left side of the firewall next to the armoured cable for the ignition coil.
Attach file:
(120.07 KB)
(105.09 KB)
(148.26 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=214511