Re: 1941 110 Club Coupe

Posted by Dell On 2020/1/18 23:06:57
I found two different assemblies listed in parts book. I would say if the handle and lock all work to open and close the trunk use it. One thing you have wrong is the short tube goes inside the trunk. Look at the pictures, brown car is my 42 other one is a friends 41-110 that lives in my shop, You can always get a longer tube and bolt and bind the support after you unbolt it from the pot metal ( do not bend attached to the pot metal ). Good luck

Attach file:



jpeg  (184.36 KB)
1697_5e23d59237ba6.jpeg 1920X1440 px

jpeg  (160.30 KB)
1697_5e23d5b5186f1.jpeg 1920X1440 px

jpeg  (220.50 KB)
1697_5e23d5d130b88.jpeg 2048X1536 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=218459