Re: '37 120 Clock installation

Posted by HH56 On 2020/4/26 10:33:15

If you are speaking of where the power wire mounts on the clock mechanism itself, there is usually a stud extending from the clock or if space is at a premium possibly a lower profile screw terminal. Either one is mounted in an insulating bushing on the back of the clock mechanism. Can't speak to 37 but on later clocks thru 47 the terminal is hidden and protected by a cover plate which is screwed onto the finished housing which holds the clock mechanism and mounts the assy to the glovebox door. If 37 had the illuminating light for the glovebox interior which turns on when the door opens, the bulb power wire also attaches to the same clock terminal.