Inner fender splash shields rubber replacement
Posted by Larry Reber On 2021/2/1 23:41:37
Continuation of my 37 115c work.
The inner splash cover bottom rubber edge was hard and basically disintegrated when we pulled the front clip.
Research found a cloth impregnated material from STEELE RUBBER and rivets from Tacoma screw.
I was able to do a fairly close replication of the edge and made a templet for the piece on 1" chart paper.
Attached are photos and information on the project.
Product info
From Steel Rubber products
Home>Restoration Parts>Hood, Cowl & Fender>Splash Apron / Dust Shields>Masticated rubber sheet
Masticated rubber sheet
Tubular rivets, See photo
Hope this helps on other restoration projects around the world.
Attach file
:
20210105_184020.jpg
(287.12 KB)
20210105_184038.jpg
(223.40 KB)
20210105_184000.jpg
(262.58 KB)
20210128_185051.jpg
(310.47 KB)
20210128_185059.jpg
(354.98 KB)
20210128_185103.jpg
(374.57 KB)
20210128_185114.jpg
(362.45 KB)
20210128_185539.jpg
(215.84 KB)
20210128_185647.jpg
(261.30 KB)
20210128_190238.jpg
(318.98 KB)
131288002_10224815790445593_366535512620607193_o.jpg
(121.09 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=229969