Re: 1928 Horn Button -wiring issue

Posted by jimw On 2022/9/1 12:59:04

Gar

If you mean that there is no continuity between the horn wire at the wheel and the #9 terminal on the lighting switch, then the wire is bad. It is not terribly hard to replace. The wire runs down the central tube in the steering column. You will need to remove the lighting switch cover. It might be best to attach a small wire or cord to the old wire as you pull it thru from either the wheel end or the switch end so that you can use it to pull the new wire thru.

Good luck,

Jim