Re: Shift Fork Springs Packard 110
Posted by Joe On 2023/6/23 22:39:30
Thanks for the reply. The U-bolt holds the clamp that holds the shifting tube to the steering column. The clamp threads onto the shifting tube to a location above the threads that appears to have had a locking ring at one time (See photo). You can see the indentation on the column below the lower fork. Holding the two forks together there appears to be a much larger space than what would be typical for just a washer or spacer. What has me puzzled is the bracket can only be threaded to the lower locking ring and no further. I would have to use a very thick spacer to make up the gap.
Attach file:
Photo 6.jpg (218.26 KB)![226160_649665681c783.jpg 1920X1439 px](https://packardinfo.com/xoops/html/uploads/newbb/thumbs/226160_649665681c783.jpg)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=258482