Re: Shift Fork Springs Packard 110

Posted by Joe On 2023/6/24 9:22:36

Mike at Max Merritt sent me this photo. Apparently mine should look like this. The location of the lower locking ring and washer on my shifter tube are much further from the lower fork which may explain the large diameter spring. Notice the space in my photo compared to this photo. I can't change the location of the ring so I would need a much thicker spacer to hold the forks together. My shift tube looks slightly longer and I wonder if someone swapped it out. That may explain having to add a small piece of inner diameter spring for the longer length (if its not broken). Makes my head spin!

Attach file:

---

  Photo 7.jpeg (384.76 KB)