Re: 1937 120-C door window metal channel weatherstrip
Posted by ElGroucho On 2023/7/3 21:41:25
Here's a better picture of the full window. As shown by my fingers the bottom of the glass is set into the metal channel. But with what? Glass setting tape or weatherstrip. Thanks all in advance.
Quote:
Attach file:
20230703_193901.jpg (401.81 KB)
Quote:
ElGroucho wrote:
Correct on the felt channel which I have. But what I'm speaking of is what the bottom portion of the glass that would then slide into the metal channel (the metal channel that attaches to the up/down roller mechanism). Wondering if it's glass setting tape that gets used to set the glass in or if that weatherstrip is used.
Quote:
BigKev wrote:
It should be a felt line channel with a rubber and metal backing that goes in the channel that window slides up and down against.
Attach file:
20230703_193901.jpg (401.81 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=258826