Re: Upper control arm bushings replace....

Posted by TxGoat On 2023/8/3 17:59:23

I don't think the bronze bushing information applies to the upper outer (rubber/steel) bushing that you are replacing. The steel inner sleeve on the new parts is correct.

You'll probably need some variation on the bolt/socket procedure to install the new bushings.

Once the new bushings are installed and the parts re-assembled, it's a good idea to tighten the bolt that goes through the bushing sleeve with the road wheel in place and the car sitting on the ground.
That way, the rubber bushing will be "neutralized" most of the time.