Re: '32 901 Sedan Generator Polarization
Posted by Marty or Marston On 2023/9/9 13:15:03
I talked to Dave Baratto (Buchanan Auto Electric in Oakland) and he walked me through the procedure on repolarizing the generator. He said to 1) disconnect the small white wire, which is the Field wire (see photo) and then to flash the dark wire to the negative terminal on the battery with another wire.
The generator charges and I'm able to get 6.7 volts or so out of it while adjusting the screw on the third brush. However, I think it should be able to put out at least 7.5 VDC.
I can't say enough about how willing Dave was to help me out. It took several calls and an email to him in order for me to understand everything. While he did not ask for anything, I'm going to drop a check in the mail today.
Attach file:
Regulator_Bottom1.jpg (283.28 KB)
The generator charges and I'm able to get 6.7 volts or so out of it while adjusting the screw on the third brush. However, I think it should be able to put out at least 7.5 VDC.
I can't say enough about how willing Dave was to help me out. It took several calls and an email to him in order for me to understand everything. While he did not ask for anything, I'm going to drop a check in the mail today.
Attach file:
Regulator_Bottom1.jpg (283.28 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=261374