Re: Head Gasket Questions

Posted by Richard Taylor On 2009/4/19 22:35:58

Very easy engine to work on,you should have no trouble doing this at home.
You need to properly diagnose the problem.
Easy to check , remove and inspect the spark plugs . Inspect for anything that looks like coolant on the plugs. Rock the engine over slowly.I prefer to leave the trans in 2nd gear and rock the car a little.best to do it slow because if coolant has filled the cylinder it will look like old faithful when it exits the plug hole.
If it does have coolant in one or more of the cylinders its best to get the head off and cylinders cleaned asap.Let the oil drain out while your installing the new gasket.Keep your best buddy's favorite beverage available,the cylinder head is heavy and best handled by two .
Take the head to your machine shop for inspection and and machining if needed.Taking the hood off isn't necessary,but it sure would be nice not to bang your head.