Re: 1930 Rocker Panel Cover - Gasket Change Challenges

Posted by Owen_Dyneto On 2024/5/24 12:10:39

On my 1934 Eight (same valve lever and roller arrangement) I was able to remove the cam follower covers/levers/rollers with lots of frustrating effort without lifting any of the valves off their seats. But to reinstall them I had to lift and block open those valves that were open when the units were removed, i.e. those where the cam lobe was off it's base line. If you have a choice, this is a job best set aside until such time as a valve servicing is needed.