Re: 1940 110 Body mounts, bolts & shims
Posted by Brian Hart On 2024/6/6 16:27:53
Follow up question;
We have the body on the chassis and, in general, there is about 3/4" clearance between the body at the mounting hole and the support bracket mounting face (at the hole) on the frame. This is too low since the running board support is fouling the chassis.
What would be the correct starting height for the proper clearance between the body and frame at the mount?
We have the body on the chassis and, in general, there is about 3/4" clearance between the body at the mounting hole and the support bracket mounting face (at the hole) on the frame. This is too low since the running board support is fouling the chassis.
What would be the correct starting height for the proper clearance between the body and frame at the mount?
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=272519