Re: Steer me on the right path please!

Posted by PackardV8 On 2009/7/21 21:09:31

Note that on some cars with leaf springs and solid axle in the front, the center bolt of the spring may set closer to one end of the the spring than the other. If the springs were (or can be) installed backwards it will upset the caster angle.

Look on eBay for a caster/camber measureing tool. Usualy about $30-$40 each. Only need one but two make it easier. Be careful about what u buy tho. I use one called a Trik-ee caster camber measureing tool.

The tool is really only needed for caster measure. Works good for camber measure too. Camber can be measured with a common carpenters level. Toe in set with a tape measure. Need a good smooth level floor.

If u don't want to set alignments yourself then at least do a before-and-after the alignment shop check.