Re: Urgent Online Advice Needed; re, King Pins..

Posted by PackardV8 On 2009/8/23 9:38:23

Until someone shows up that really knows your particular model i'll take a guess:
Look at the BOTTOM of the steering knuckel to see if there is a welch plug driven into the bottom of it. If so then drill a small hole in center of welch plug and pry out the plug.


IF the TOP of the KING PIN is threaded at least 3/8 diamenter then install a sleeve over the king pin bottoming on the knuckle or axle but HIGHER than the king pin. Install a bolt and large washer and tighten the bolt and draw out the king pin..