Re: Urgent Online Advice Needed; re, King Pins..

Posted by Owen_Dyneto On 2009/8/24 11:24:24

Brian - glad you see what I see, looks very straight-forward. Here's another view from the parts book which may also be useful. I did go out and check mine just now, the tapered retaining pin is simply that, no threaded end and nut on the small end, just drive out from the smaller diameter end towards the larger. Hopefully Irish avoided the earlier advice of someone who suggested drilling the pin out. The OEM pins have lateral "flutes" on them which compress when you drive it in and hold it in place.

Attach file:

---

  (137.45 KB)