Re: Battery Cut-off Switch
Posted by Daniel Leininger On 2009/9/2 12:28:25
John,
A 'slick' installation of a solid switch.
I use a disconnect nob on the neg ground post of my Clipper. It is not close to 'slick' or convenient.
I undo the nob. Pull the cable away. Then tuck it down against the side of the battery.
It is a 'solid disconnect' but takes longer and risks 'battery acid' (anhydrite) contact.
(My wife refers to all my pants with acid holes as 'Packard Pants.')
DanL
A 'slick' installation of a solid switch.
I use a disconnect nob on the neg ground post of my Clipper. It is not close to 'slick' or convenient.
I undo the nob. Pull the cable away. Then tuck it down against the side of the battery.
It is a 'solid disconnect' but takes longer and risks 'battery acid' (anhydrite) contact.
(My wife refers to all my pants with acid holes as 'Packard Pants.')
DanL
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=35844