Re: Continuing on the Overdrive

Posted by HH56 On 2009/9/3 12:00:21

Good suggestion and certainly a simple way of doing and might be a good option to test as it eliminates almost everything stock except solenoid and OD mechanicals.

Use the 6v Bosch relay mentioned on the FAQ with output going to both 3 and 4 on the solenoid & disconnect all original wires. The switch should be available at most good electronic stores-- even a miniature would work. Using as described, if solenoid is OK you have overdrive. If no buzzing, problem is relay box or before, if buzz then solenoid.