Re: Continuing on the Overdrive

Posted by HH56 On 2009/9/3 12:31:06

I wouldn't do it just that way. Without 3 connected, you'd have the machine gunning and slamming the pawl in and out can't be good. You need power to 4 not a ground so that wouldn't work. The current draw is pretty high so an ordinary switch to carry it might be hard to come by. If you do anything along those lines, would suggest the method Phils38cpe mentioned with the relay and small switch. That's simple, small cost in components and pretty much would give an answer. You might not even need to worry about the ground out circuit for the test--just let off on gas to disengage when you turn the switch off