Re: 37 will turn over but not fire.
Posted by sanford mitchell On 2009/11/5 19:16:54
need help on reassembly of the carter wa 1 477 s used on sixes 1937 thru 1942's i suppose the 120 carters would be similar
got rebuiliding kit and ready to put back together but cant remember if the meterrod arm goes over or under cam lever arm
see photo below pointing out with an ice pic. metering rod arm to right of ice pick and cam arm to left..
when i install the metering rod the weight and spring from the metering rod holds the it up in the air...in otherwords what moves the meter rod up and down.. maybe somebody could remove their dust cover on carb and check to see where arm is located..thanks guys
Attach file:
(36.44 KB)
got rebuiliding kit and ready to put back together but cant remember if the meterrod arm goes over or under cam lever arm
see photo below pointing out with an ice pic. metering rod arm to right of ice pick and cam arm to left..
when i install the metering rod the weight and spring from the metering rod holds the it up in the air...in otherwords what moves the meter rod up and down.. maybe somebody could remove their dust cover on carb and check to see where arm is located..thanks guys
Attach file:
(36.44 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=40105