Re: 1936 120 Gasket Question

Posted by Rusty O\'Toole On 2010/3/19 14:12:05

If you want to be old fashioned cut a gasket out of a cereal box. Lay the cardboard on the head and tap tap tap around with a small ball peen hammer.

For the Rockefellers in the crowd you can buy gasket paper at any parts store. Mark the gasket and cut out with scissors or an Exacto knife. Use a notebook paper punch to cut the bolt holes.

It's best to cut out the center and the bolt holes first then cut around the outside. The material is easier to handle that way.