Re: Adding an overdrive...

Posted by 32model901 On 2011/2/13 7:14:57

Gear Vendors unit run $2600 to $2900 (USD)depending on the application.

You get what is shown in the picture above. The purchaser has to have his drive shafts shortened and balanced, fabricate a mounting plate, and complete the installation and wiring.

The GV unit is controlled by a 6V or 12V solenoid. The speedometer gear inside the GV unit is matched for your tire size and read end ratio so your speedometer / odometer will read accurately.

Additional info can be found at:http://www.gearvendors.com/