Re: Bits of brass in a 32 900 differential
Posted by 32model901 On 2011/4/24 15:32:09
Tom,
It may help to go CSI on the carrier.
I don't know if it's the same carrier you're working on now, but on the pictures you have at the Packard Paddock, I can see some marks on each side of the carrier that could be used to establish a pre-teardown orientation.
If it's a different carrier maybe you have some pictures of the current carrier you can analyze.
Regards,
Dave
Attach file:
(32.44 KB)
It may help to go CSI on the carrier.
I don't know if it's the same carrier you're working on now, but on the pictures you have at the Packard Paddock, I can see some marks on each side of the carrier that could be used to establish a pre-teardown orientation.
If it's a different carrier maybe you have some pictures of the current carrier you can analyze.
Regards,
Dave
Attach file:
(32.44 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=75494